Allgemein
Hersteller
Hewlett Packard Enterprise
Hauptmerkmale
Produktbeschreibung
HPE Aruba 2930M 48G POE+ 1-Slot - Switch - 48 Anschlüsse - managed - an Rack montierbar
Gerätetyp
Switch - 48 Anschlüsse - L3 - managed - stapelbar
Gehäusetyp
An Rack montierbar 1U
Untertyp
Gigabit Ethernet
Ports
44 x 10/100/1000 (PoE+) + 4 x Kombi-Gigabit-SFP
Power Over Ethernet (PoE)
PoE+
Leistung
Durchsatz: 112 Mpps ¦ Switching-Kapazität: 176 Gbps ¦ Latenz (1 Gbps): 3.1 µs ¦ Latenzzeit (10 Gbps): 3.4 µs ¦ Latenzzeit (10 Mbps): 98.5 µs ¦ Latenzzeit (100 Mbps): 11.8 µs
Kapazität
IPv4-Einträge in Routingtabelle: 2000 ¦ IPv6-Einträge in Routingtabelle: 1000 ¦ RIP-Routen: 10000 ¦ Statische Routen: 256
Größe der MAC-Adresstabelle
32.768 Einträge
Jumbo-Rahmenunterstützung
9220 Byte
Routing Protocol
OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, OSPFv2, statisches IP Routing, IGMPv3, OSPFv3, statisches IPv4-Routing, statisches IPv6-Routing, ECMP, RIPng, MLD, CIDR
Remoteverwaltungsprotokoll
SNMP 1, SNMP 2, RMON 1, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, SSH-2, CLI, XRMON
Leistungsmerkmale
Flusskontrolle, Vollduplex-fähig, DHCP Support, BOOTP-Unterstützung, ARP-Unterstützung, VLAN-Unterstützung, IGMP Snooping, Syslog-Unterstützung, DiffServ-Unterstützung, IPv6-Unterstützung, SNTP-Unterstützung, sFlow, Spanning Tree Protocol (STP) Support, Multiple Spanning Tree Protocol (MSTP) Support, Access Control List (ACL) Support, Quality of Service (QoS), Jumbo-Frames-Support, DHCP-Server, MLD-Snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), LLDP-Support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), Sperre für MAC-Adresse, dynamischer ARP-Schutz, DHCP-Schutz, Dynamic VLAN Support (GVRP), Multiple VLAN Registration Protocol (MVRP), Neighbor Discovery Protocol (NDP), Class of Service (CoS), Type of Service (ToS), OpenFlow-Unterstützung, CPU-Schutz, Internet Control Message Protocol (ICMP), ICMP Router Discovery Protocol (IRDP), Virtual Extensible LAN (VXLAN), Management Information Base (MIB) II, LLDP-MED, STP BPDU Guard
Produktzertifizierungen
IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX, IEEE 802.3bz
Stromversorgung
Wechselstrom 120/230 V (50/60 Hz) - Spannungsversorgung nicht installiert
Abmessungen (Breite x Tiefe x Höhe)
44.25 cm x 32.43 cm x 4.39 cm